» About

TE37 @ 19×9.5 +19

admin — Sun, 08 Aug 2010 06:15:02 +0000

TE37 @ 19×9.5 +19. This is with a 15mm spacer in the rear. No RUBBING and much better fitment.

Click for High Res Pic

NSX- Rigged

admin — Mon, 14 Jun 2010 03:16:28 +0000

I attempted to do a proper photoshoot now that the nsx is pretty much “done” for the year. I only got to do this rig shot before it started raining. I usually like to have an “assistant” for these type of shoots for safety, luckily I didn’t end up destroying the car. lol….

Click on the image for a higher resolution image.

Recaro Pole Positions (Teaser)

admin — Mon, 14 Jun 2010 03:14:00 +0000

Picked up a set of Recaro Pole Positions in leather. Bespoke Auto Interiors hooked me up again with the custom orange stitch.

Feelin’ it

admin — Thu, 06 May 2010 02:26:42 +0000

FEEL’S Honda Twincan is a legendary Honda tuning shop. They have been building and servicing Hondas for 24 years out of its Saitama-based facilities. The Japanese super-tuner offers just about anything imaginable for a number of popular VTEC engines, including the B-, C-, F-, and K-series, as well as upgrades ranging from carbon-fiber body kits to radiators and exhaust systems for Civic, Integra, S2000, and NSX chassis dating back to the mid-’80s. The range of FEEL’S products might surprise you and is far more extensive than its rivals. Its product line includes everything from lightweight batteries, steel braided brake lines, brake pads, gauge cluster assemblies, and a number of other parts you might not normally expect from a company that’s still happy to take on jobs as small as a simple oil change. If you find yourself near Saitama, be sure to check them out. With FEEL’S parts at such a premium here in the states, it’s almost an easier way to get your hands on some (Source: Honda Tuning). Here is a new snazzy oil cap courtesy of Feel’s.

Feel's Oil Cap

Custom Nardi Steering Wheel

admin — Wed, 28 Apr 2010 04:16:49 +0000

Met up with a local guy Bespoke Auto Interiors last week and he hooked up my nardi wheel. This is the 330mm deep corn nardi wheel. As you steering wheel whores know, the wheel normally comes with red stitching, but I wanted none of that. This was all done by hand. A few quick pics.

(click pic for high res)

NSX Targa Rear Strut Tower

admin — Fri, 16 Apr 2010 23:30:15 +0000

Added this new rear strut tower by STMPO. Color matched imola orange, it is a one piece design without adjustments or brackets, crafted by hand using 4130 1 1/2 ” .065 wall chromoly tubing ..aka – F1 race spec standards. The brace is also tig welded with ER 308L stainless steel rod for strength. For more info, check out www.stmpo.com

Click Pic for larger version

Stoptech+Advan+Project Kics

admin — Sun, 28 Mar 2010 21:35:02 +0000

Finally got a chance to get the brakes installed…thanks to the good guys at Project X.

Project Kics – R40 Neo Chro Extended Lug Nuts

admin — Fri, 19 Mar 2010 20:19:53 +0000

Hit up Touge Factory today and picked up a few sets of lug nuts. Pricing was so sweet, I decided to get a spare set! Just kidding… 12×1.5 for myself, and a Nissan spec 12×1.25 for my buddy Ron. The burnt titanium finish should tie in nicely with my exhaust tips. Excuse the rust in the second pic, BBK to be installed next week.

Project Kics- Neo Chro

Kics- Installed!

Volk TE-37 (Formula Silver)

admin — Sun, 14 Mar 2010 07:14:01 +0000

These just arrived today. This is the only Formula Silver finish (in NSX fitment) in the country.This finish was first introduced with the Volk G2′s. Sizes: 18×7.5 (+30) (front) & 19×9.5 (+34) (rear). Plan on going with a 5mm spacer in the rear to essentially be at +29. I found that +29 on a 9.5″ width wheel should give me a very flush setup.

Volk TE37

Comptech

admin — Sat, 27 Feb 2010 20:52:56 +0000

Most of the aftermarket intakes available for the NSX offer little to no performance gains. In fact, a few out there actually degrade performance…a testament to Honda engineering. With this in mind, I decided to replace the filter and keep things as is. But why not get my style on? So I picked up this snazzy light-weight (dry) carbon fiber air box lid from Comptech.

Advan Centercaps

admin — Fri, 19 Feb 2010 07:25:24 +0000

These are probably not worth the price, but I wanted a nice way to finish off the new wheels. Advan has traditionally never released centercaps with their wheels; but due to increased popularity on the street, they have released these new caps in 2009. This is the Low type. Thanks to the boys at Z1 Performance for hooking me up.

Advan Center Cap

Strobing

admin — Fri, 05 Feb 2010 00:45:39 +0000

Here is a test shot with some new cheap flashes. Used Canon EF: 24-70mm f/2.8 L, two Vivitar 285 HV, Blazzeo RF Speedlites Trigger and Receivers.

NSX Motor

For the hell of it, I decided to take a pic of my Advan RS’s. I used a Canon EF: 24-70mm f/2.8 L, and one Vivitar Flash (off camera). The picture is comprised of two layers due to the body of the car looking too blown out.

Crazy Angle Shot

Advan RS- Semi-Proper Shoot

admin — Fri, 27 Nov 2009 23:03:18 +0000

Gallery (click thumb for high resolution):

Wallpaper Size:
1920×1266 (pic 5)
1964×1200 (pic 2)

Advan RS- Winter Shoes?

admin — Wed, 25 Nov 2009 05:24:10 +0000

New Advan RS Teaser. Offsets: 17×8 et37 (f) and 18×10 et35 (r). I used a 3mm spacer in front and 5mm in rear. This essentially changed the offsets to +34 and +30 respectively. Car is a bit damp from driving in the rain. First time with these tires (wheels/tires used), handled well. Specs, 215/40/17 and 265/35/18. I typically like to run a bit lower profile but what ya gonna do with a used setup?

wow

admin — Tue, 27 Oct 2009 05:05:13 +0000

I just realized some of my early photoshoots sucked really bad. In case you’re wondering, yes I deleted those pics. haha

Last Shoot of 2009

admin — Mon, 26 Oct 2009 00:16:26 +0000

I decided to take a few shots before the NSX goes away for the winter. New look coming in 2010…stay tuned.

Gallery (click thumb for high resolution):

Stoptech BBK

admin — Sat, 24 Oct 2009 00:32:17 +0000

Teaser of new stoptech BBK. Professionally painted Imola Orange Pearl with 5 coats of clear.

Exhaust Video

admin — Tue, 06 Oct 2009 22:02:06 +0000

Here is a video by my buddy Jeremy Cliff.

You are specifically hearing the following exhaust components:

GTone f1 v5.1 exhaust (stainless steel with factory issued titanium burnt single tips)
Cantrell Concepts Airflow Induction System
Custom TIG welded Test Pipes

GTone F1 v5.1 NSX Exhaust from Jeremy Cliff on Vimeo.

LED Tails!

admin — Thu, 27 Aug 2009 04:12:39 +0000

LED tail lights were added. Really updates the look of the NSX. Not shown are the LED’s for the turn, brake (brighter), and reverse lights.

New Lens: 70-200 L 2.8 (IS)

admin — Fri, 17 Jul 2009 02:13:43 +0000

New lens arrived… a few “test” shots. One of these days I’m going to do a proper photoshoot. The Canon 70-200 L 2.8 (IS).

Click Pic for High Res Version!

Super Cars Saturday Shot

admin — Mon, 08 Jun 2009 01:28:35 +0000

Super Cars Saturday’s was this past weekend in Glenview, IL. Here is a shot I took at the meet. From an enthusiast standpoint, meets are a great to see a variety of cars. From a photographer’s prospective, you have no control on weather, people, light, etc. Click here for the larger version of this shot.

SCS Shot

NSX Sandwich

admin — Mon, 01 Jun 2009 19:05:30 +0000

Here is a quick pic from this past weekend’s meet @ GRD (Villa Park, IL). I really liked the BBS LM wheels that my buddy John selected for his GTR. The red centercaps work really well. My NSX is intentionally out-of-focus to highlight the BBS wheels.

BBS LM's on a GTR

GTone 5.1 Installed

admin — Sat, 09 May 2009 16:13:58 +0000

Here is a quick shot of the downforce diffuser and GTone exhaust installed.

GTone 5.1 + DF Diffuser

Zanardi Shift Knob & NSX-R Shift Boot

admin — Thu, 23 Apr 2009 20:34:07 +0000

In 1999, a special Zanardi edition NSX was sold in the United States. With only 50 of these ever sold, it is easily the most coveted NSX to date. The signature series NSX takes its name from two-time CART open-wheel racing championship driver, Alex Zanardi. This shift knob was specially made for the Zanardi edition NSX. It’s weighted, and a much improved shift feel compared to the stock shift knob.

A feature on the new 2002 NA2 NSX-R in Japan is a unique mesh shift boot complete with carbon fiber trim. This piece replaced the factory shift boot and console trim piece.

Downforce & SOS

admin — Thu, 23 Apr 2009 20:25:11 +0000

Just a small engine dress up part. This is a Carbon Fiber Manifold Plate by Science of Speed.

I added a rear window garnish to replace the OEM version. The Rear Window Garnish (RWG) is made of carbon fiber and modified by Downforce (DF) to take advantage of the car’s air flow during high speeds. DF raised the vent by an unnoticeable 3/4″ in height the vent can catch more air to cool the engine bay off.

Downforce Rear Window Garnish

Welcome to my NSX Blog

admin — Fri, 03 Apr 2009 20:06:44 +0000

Welcome to my new NSX Blog. This site will document my NSX progress and build.