Results 1 to 8 of 8

Thread: Winter build

  1. #1
    Site Regular georgemarinakos's Avatar
    Join Date
    Feb 2007
    Location
    Schaumburg
    Posts
    181

    Default Winter build

    Hey guys as many of you already know I completed an LS swap on my G35 2 yrs ago with upgraded forged internals, cam, and heads ect. So this winter I decided to start up another little project. This was the idea I wanted to put a supercharger on my car but, all the tuner kits out on the market where around 4k or more. So I decided to go the cheap route and fabricate my own kit. So I started looking around the internet and picked up a 2012 GT500 supercharger from EBAY for $300 that had only 2000 miles on it and had an upgraded smaller pulley. So now I came to the issue of making the Ford supercharger fit onto my Chevy engine. So I did a little research and bought an all aluminum intake manifold from Edelbrock. What I did next was cut the flanges off the manifold and boxed it all up cutting out an opening to mount the supercharger. Next I put on larger injectors, new fuel rails, and new fuel lines. I was also able to buy a larger serpentine belt and run the supercharger off the crankshaft. I completed the whole project for under $1000 when I took it to the dyno I noticed an increase of over 280 torque and 230hp with my car making 680tq 635hp to the wheels without my 200 shot .
    Attached Images Attached Images

  2. #2
    Site Regular georgemarinakos's Avatar
    Join Date
    Feb 2007
    Location
    Schaumburg
    Posts
    181

    Default

    some more pictures
    Attached Images Attached Images

  3. #3
    Senior Member mvp2765's Avatar
    Join Date
    Apr 2009
    Location
    Gold Coast
    Posts
    1,412

    Default

    Damn. Are even able to catch the pavement with those numbers?
    **Get busy living, or get busy dying.**

  4. #4
    Site Regular georgemarinakos's Avatar
    Join Date
    Feb 2007
    Location
    Schaumburg
    Posts
    181

    Default

    Yea I just run drag radials.

  5. #5
    Executive Status
    Join Date
    May 2004
    Posts
    3,068

    Default

    nice job saving yourself cash and getting the job done.

  6. #6
    Site Fanatic ZMan8's Avatar
    Join Date
    Aug 2011
    Location
    Northwest Suburbs
    Posts
    422

    Default

    So this is an infiniti with a chevy engine thats supercharged by ford. mind = blown :beer:

    Good job getting it done.:thumbup:

    Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
    2010 370Z 40 Anniv., 6 MT | Fast Intentions | Swift Spec-R | Z1 Motorsports | Redline | JWMotoring |
    2010 Scion xD, Black, 5 Speed Manual

  7. #7
    Site Regular
    Join Date
    Jun 2011
    Location
    chicago
    Posts
    156

    Default

    That's ingenuity at its best!
    if it has tits or tires its going to cause trouble

  8. #8
    n00b
    Join Date
    May 2007
    Location
    Chicago
    Posts
    5

    Default

    200+hp for under $1000.00. *applause*

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •